top of page

SA BENCHMARK BIPOD

A new kind of bipod for airguns.

The SA BENCHMARK BIPOD is developed for benchrest shooting with light recoil rifles, and it gives a rock solid support and is yet lightweight, versatile and intuitive to use.

The benchmark gives you an edge on the bench and beyond. Developed and made in Sweden.

SA_JET_Air_outdoor_4.jpg

Key features.

Super solid, no play.

Step-less leveling and height adjustment.

Dual side adapter for Arca and Picatinny.

Interchangeable quick mount legs.

Interchangeable feet compatible with Atlas.

Attention to detail and usability.

SA_Benchmark_detail_05.jpg
SA_Benchmark_detail_07.jpg
SA_Benchmark_detail_03.jpg

The legs.

On the top of each leg there ́s a quick mount contruction enabling a super fast and easy attachment to the leg holders.

The adapter, Arca and Picatinny.

Both arca rail and Picatinny rail on each side. To open it, roll out the side wheel to max, then push the wheel from the outside with your thumb.

Atlas type rubber feet.

Push the small uickmount bearing to detach and remove the feet, easily. Suitable for most types of shooting.

There are three main parts of the Benchmark bipod.

  1. The adapter that attaches to Arca rail or Picatinny rail. One interface on each side.

  2. The 360 friction adjustable leg holders.

  3. The quick detachable legs.

Practical shooting angles: straight (90°) to 30° both ways.

SA_Benchmark_site_2_spalt_bild_1.jpg

SA BENCHMARK BIPOD,
what’s included.

Complete bidpod with standard legs, foot adapters and detachable rubber feet. First edition comes in an SA camo neoprene case (first edition). Manual and hex key also included. Short legs / leg extensions are optional. 

SA_Benchmark_bipod_all_1.jpg

“Make your bipod even more unique and suit your needs.”

SA BENCHMARK
Leg extensions.

With the patented QR leg innovation and the leg extension you can set three lengths on the Benchmark while retaining the same solid support. Lengths with SA rubber feet: Extension (short): 13,5 cm, Standard leg 15,5 cm and extended legs: 24,5 cm. The leg extensions are included in the First edition of the Benchmark all packed in the SA camo case.

Benchmark_401000_rev08_Studio_04_grey.jpg
SA_Benchmark_site_3_spalt_bild_1.jpg

Short setup.

Hight to Gunbase Jet Air 15-9 cm.

SA_Benchmark_site_3_spalt_bild_2.jpg

Standard setup.

Hight to Gunbase Jet Air 17,5-11 cm.

Long setup (for top mount).

Hight to Gunbase Jet Air 26-12,5 cm.
(Top mount 17- 8 cm). 
Hight to Gunbase FX Panthera,
top mount 18,5-11 cm.
Hight to Gunbase FX Impact,
top mount 17,5-14 cm.

SA_Benchmark_site_3_spalt_bild_3.jpg
SA_Benchmark_bipod_JET_Air_topmounted_1.jpg

Specifications.

  • EN AW 6082 Aluminium with steel, plastic and alubronze details.

  • Adapter without legs: 143 x 50 x 30 mm.

  • Standard legs: 12 cm without feet. 

  • Short legs (extensions) 9 cm. 

  • Foot adapter with foot 3,5 cm.

  • Leg lengths with feet: 12,5 cm, 15,5 cm, 24,5 cm.

  • Leg angle: 17 degrees.

  • Bipod weight (std): 550 g.

  • Case: 220 x 140 x 45 mm.

  • Total weight with case: 800 g.

Features.

  • Super solid, no play.

  • Step-less leveling and height adjustment.

  • Quick mount dual side adapter for Arca and Picatinny.

  • Interchangeable quick mount legs.

  • Interchangeable feet compatible with Atlas standard interface.

  • Leg extensions (optional).

  • First edition comes in an SA camo neoprene case.

Features Leg extensions

  • Use as extensions or as extra short legs.

  • Super solid setup also with use of the extensions. 

  • Interchangeable with the SA QR lzeg system (pat pend).

  • Compatible with the SA foot adapter (interchangeable feet).

  • Included in the First edition.

Do you want to make a purchase? 

bottom of page